The little things matter when it comes to lifting and stabilizing heavy objects. The strut that is a “little crooked” when you started can quickly become very crooked and unsafe under a substantial load. Our attention to detail must stay sharp when setting up to stabilize and lift.
Below is an example of taking a shortcut that could be catastrophic later. Photo A is a picture of the base of a stabilizing strut with the ratchet strap secured into the manufactured attachment point. This…
Added by Josh Pearcy on July 27, 2020 at 12:08pm — No Comments
Added by Nicholas Christensen on July 20, 2020 at 9:30pm — No Comments
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2005
1999
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
75 members
83 members
178 members
73 members
328 members
611 members
12 members
123 members
15 members
408 members
© 2023 Created by fireeng.
Powered by
FE Home | Product Center | Training | Zones | Fire-EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue |