Fire Engineering Training Community

Where firefighters come to talk training

Jason Hoevelmann's Blog – November 2012 Archive (1)

The Glove Friendly RIT Mask

This photo shows a way to make an SCBA face piece for your RIT bag/kit glove friendly. You can use a garden hose or any kind of rubber tubing or hose that would be easy to grab with a gloved hand. We used a small bungee cord and ran it through the bonnet and attached both ends to the hose. This allows for easy feeling and grabbing the back of the mask with gloved hands.…

Continue

Added by Jason Hoevelmann on November 12, 2012 at 8:57pm — No Comments

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2022   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service