*****UPDATE: I'm a big enough man to admit when I'm wrong. I was challenged on the ability to put 100 psi in a can overfilled with water so I experimented. It is possible to fill a can with 100 psi regardless of how much water is in it, so proper pressure does not equate to a properly filled can. The only way to accurately check a can is to weigh it and check the pressure with a gauge to make sure the cheap gauge on the can is accurate.*****
Do you know how to fill the…
ContinueAdded by Clay Magee on August 11, 2019 at 3:30pm — No Comments
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
180 members
74 members
330 members
614 members
13 members
123 members
16 members
411 members
83 members
6 members
© 2022 Created by fireeng.
Powered by
Home | Product Center | Training | Zones | EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue | Community | Mobile |