This photo shows a way to make an SCBA face piece for your RIT bag/kit glove friendly. You can use a garden hose or any kind of rubber tubing or hose that would be easy to grab with a gloved hand. We used a small bungee cord and ran it through the bonnet and attached both ends to the hose. This allows for easy feeling and grabbing the back of the mask with gloved hands.…
ContinueAdded by Jason Hoevelmann on November 12, 2012 at 9:57pm — No Comments
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
45 members
116 members
62 members
73 members
166 members
65 members
277 members
510 members
10 members
106 members
© 2024 Created by fireeng. Powered by
FE Home | Product Center | Training | Zones | Fire-EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue |