Fire Engineering Training Community

Where firefighters come to talk training

Timothy Patrick's Discussions

Discussions Replied To (13) Replies Latest Activity

"LOL, Art! I'll try to remember not to use 60 pound test! TJP"

Timothy Patrick replied Jan 31, 2012 to 2 Parts: Wire/Cable cutters, and What's in your pockets?

5 Jan 31, 2012
Reply by Timothy Patrick

" "

Timothy Patrick replied Jan 31, 2012 to 2 Parts: Wire/Cable cutters, and What's in your pockets?

5 Jan 31, 2012
Reply by Timothy Patrick

"Thank you Brother Art.... could you maybe describe how he attaches the wedges to his…"

Timothy Patrick replied Jan 30, 2012 to 2 Parts: Wire/Cable cutters, and What's in your pockets?

5 Jan 31, 2012
Reply by Timothy Patrick

"So, I guess the question is whether you want to maybe be squeezed by the door or get…"

Timothy Patrick replied Jan 25, 2012 to What side of the door on entry?

7 Jan 25, 2012
Reply by Timothy Patrick

"Agreed, Alan. I've always preached that, but the guy wanted to know about pushing fi…"

Timothy Patrick replied Jan 23, 2012 to water "pushing" fire

16 Jan 23, 2012
Reply by Timothy Patrick

"BTW, Ricky, usually the truckies will enter the same way as the engine guys went in.…"

Timothy Patrick replied Jan 22, 2012 to Where does the 1st line go?

15 Jan 22, 2012
Reply by Timothy Patrick

"I've seen this burned to unnburned practice fail too many times. Go to where the fir…"

Timothy Patrick replied Jan 22, 2012 to Where does the 1st line go?

15 Jan 22, 2012
Reply by Timothy Patrick

"We use TFT's on 1.75"  w 100 psi settings. We send 200 p.s.i. to them. This should,…"

Timothy Patrick replied Jan 22, 2012 to What is your Target Flow?

36 Jan 22, 2012
Reply by Timothy Patrick

"Dave, we also use a Mattydale load. We have 2 200' and 2 300' Mattydales. On the 200…"

Timothy Patrick replied Jan 17, 2012 to Preconnect Setup

26 Jan 17, 2012
Reply by Timothy Patrick

"Terminology always amazes me as how it changes, from place to place and how the vern…"

Timothy Patrick replied Jan 17, 2012 to Wagon Pipe Nozzle??

5 Jan 17, 2012
Reply by Timothy Patrick

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service