Fire Engineering Training Community

Where firefighters come to talk training

Here is a short video on ladder bailout. This drill must be done with a safety line in place and all students must wear PPE for the drill. Make sure chin straps are secured. Remember, which ever arm is your pivot arm, the one that goes under the rung, it should be on top when you get side ways. Practice and train frequently. Train with your ladders and get proficient.

As always, thanks for reading (watching) and stay safe.

Jason

 

http://youtu.be/UZPTYNSwGCs

 

Views: 2140

Reply to This

Replies to This Discussion

Would like to use for our guys to watch.

 

Have at it!
Thanks , there is very little around here in NY to teach this stuff.
Anytime, if there is something in particular you are looking for, let me know and I will get it to you.

-This is a ladder bailout techniques that we started teaching our people about ten years ago.  That being said, the technique is sound and does work provided the student learns it from a qualified instructor in a very safe environment.

-The limitation to the technique is that it depends on the ladder being set at a more shallow angle than is typical in the fire service.  Most firefighters learn that ground ladders are to be set at an approximate 75* angle which is to steep to perform this ladder bailout maneuver safely.

-The reason for mentioning this is that if this technique is to be a viable option on a dynamic fireground than all ground ladders must be raised with the intention of being used in a bailout maneuver. Under such circumstances there will be little to no time to raise and properly position a ground ladder for a true bailout. But, depending on the size of your department, the solution is as simple as re-training all members in the "new" positioning angle of ground ladders when they are instructed in the bailout technique.

-The other possible solution is what many departments are implementing, and what may soon become a national standard, the issuing of a bailout kit that is worn over the bunker gear.  The kit consists of an anchor, a harness, a friction/control device and escape line.  Easily deployable that rapidly gets the firefighter out of the IDLH.

Jason - any thoughts about training for an auditorium raise and the safety requirements?

We have been teaching that we set the ladder at the exaggerated angle for windows, at or slightly beneath the sill. This allows for bail outs and easier rescues as the weight is taken up by the ladder. If you are going to the roof the standard 70-75 degree angle is used with 4-5 rungs above the edge.

I look into that. Haven't done that in years.  Nice idea.



John K. Murphy said:

Jason - any thoughts about training for an auditorium raise and the safety requirements?

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service