Training props

Replies to This Discussion

Permalink Reply by Shawn Tibbitts on May 4, 2009 at 9:01pm

we use a solid door frame made of steel mounted to a cement floor. the doors are quickly bolted on to the frame and we have moving locks which can be bolted in different place to mock different locking options we may run into. If you would like I can send you a photo of the prop, it might make more seance to see it rather than try to figure out what im trying to describe. Sorry its clear in my head but hard to describe the right way.

• ▶ Reply

Permalink Reply by Josh Giustra on May 4, 2009 at 9:12pm

Shawn i would love a few pictures if you can get them. Thanks for the info

Josh

Shawn Tibbitts said:

we use a solid door frame made of steel mounted to a cement floor. the doors are quickly bolted on to the frame and we have moving locks which can be bolted in different place to mock different locking options we may run into. If you would like I can send you a photo of the prop, it might make more seance to see it rather than try to figure out what im trying to describe. Sorry its clear in my head but hard to describe the right way.

• ▶ Reply

Permalink Reply by Mike Frazer on May 5, 2009 at 9:48am

Try www.tes2training.com its a great site, check it out go to the section called handouts lots of props

Hope it helps

Mike

• ▶ Reply

Permalink Reply by Todd McKee on May 5, 2009 at 10:20pm

I have a good idea for a vent saw training prop email me and i will let you know

• ▶ Reply

▶ Reply to Discussion