74 members
258 members
215 members
88 members
94 members
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
76 members
84 members
180 members
74 members
330 members
614 members
13 members
123 members
16 members
411 members
© 2023 Created by fireeng.
Powered by
Home | Product Center | Training | Zones | EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue | Community | Mobile |
Comment Wall (4 comments)
You need to be a member of Fire Engineering Training Community to add comments!
Join Fire Engineering Training Community
You should post a picture when you have it done, I'd like to see it! Good luck.
I used to think that the high heat, flexible primer coat was important, but was still irritated by the frequent cracking, even after a recent paint job. In the "Leatherhead" Group here on Fire Engineering several months ago, I found one brother who advocates skipping the primer, and instead cutting your paint with the linseed oil. I take it you read the blog article. This last paint job with the linseed oil has performed very well, has seen multiple fires in the past few weeks and barely shows even a hint of a crack. I really think the Linseed oil is the way to go. If you haven't read the blog, the instructions are there.
Ben