Fire Engineering Training Community

Where firefighters come to talk training

Does anyone use the KELLY TOOL today.

Views: 2000

Reply to This

Replies to This Discussion

Anyone know what the kelly tool is???????????????

The Kelly Tool preceded the Halligan Bar.  It was invented by Capt John Kelly of the FDNY and was used for forcible entry. It had an Adz end much like today's Halligan, but the other end was a chisel.  Paratech makes a "Kelly Tool" that looks like a Halligan without the Pike end.

Can anyone post a picture of said device?

Don't know of any pics of the original, but here is the paratech version.

Thanks. It is similar to the Halligan, which I have had opportunity to use.

I have an original one we bought a 75ft mack tower ladder from F.D.N.Y in 83 and when we sent it off for referb the chief threw the old hand tools to the side .. also got a old pro bar type halligan that came of that unit

Chris Piepenburg said:

Don't know of any pics of the original, but here is the paratech version.

Can anyone confirm if the Halligan tool was invented by a Port Authority of New York and New Jersey Police Officer by the name of Halligan?

Nope!!  Invented by Hugh Halligan of the FDNY.

http://www.nytimes.com/2005/06/05/nyregion/thecity/05fyi.html?ref=r...



Chris Piepenburg said:

Nope!!  Invented by Hugh Halligan of the FDNY.

http://www.nytimes.com/2005/06/05/nyregion/thecity/05fyi.html?ref=r...

Attachments:

The last one I saw was when I was 19 on an old 1987 Seagrave open cab ladder truck my volly house ran. I do not think they kept it on the new one when it went in service, but that was 10 years ago almost so I am not 100% sure

http://www.allhandsfire.com/KELLY-TOOL_3

Still in use...NYPD.  Not sure of any departments that use exclusively.

Reply to Discussion

RSS

Policy Page

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/archive/.

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2020   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service