Fire Engineering Training Community

Where firefighters come to talk training

Anyone have any input on 2-1/2" hi-rise packs. My department currently uses 1-3/4" and was possibly going to change this. Any info would be great especially as it relates to manpower/staffing of line and deployment . Current set up is building standpipe to 10' 2-1/2" to gated wye, to 150' of 1-3/4", to Akron Brass Chief low pressure nozzle. Thanks in advance for the feedback.

Views: 2275

Reply to This

Replies to This Discussion

Bro
I did not read all the posts, but I also want to put my 2 cents in for 2 1/2" hose. Manpower should not be an issue when it comes to standpipe operations, as the fire will be in a class 1 or 2 building by the most part, and contained. Either by default, or by design you should wait for a second engine company. Due to EWD (extreme wind drivin fires) phenomenon, the ladder companies should NOT open up until told to do so by the engine company officers. So there is some manpower right there.
One point I want to make to everyone is that all l standpipe kits should contain an inline gauge. This is not a "nice" thing to have, but should be a mandatory safety tool. It takes the onus off the pump operators, and identifies water problems, which in my opinion, outside of health and MVA LODD issues, is the leading killer of FFs. You DEFINATLY need inline gauges when you use 2 1/2" hose.
Be safe
Hey Mike,

I agree with the 2 1/2" guys. GPM puts the fire out. So many times the information the first arriving companies recieve upon arrival is going to be sketchy at best, so they probably won't know exactly what they are dealing with from the ground floor. Also, any information they recieve is old information as far as the fire is concerned and will be even older by the time crews reach the fire. The fire could be MUCH larger then reported by the time crews get to it. Another point that must be considered is that your people can only carry up so much equipment. If you load them down like pack mules with all the different "options" they may make it to the correct floor but they likely will be too tired to work. It's far better to streamline what they take up. We use a 200 ft. 2 1/2" with 1 1/4" smoothbore, and the appropriate appliances. Small fires can be put out with the larger line as you know but a small line can't put out a large fire. Dave McGrail's book on High-Rise and Standpipe buildings is a fantastic text, I highly recommend it. This text will help you communicate many of the aspects of High-Rise to those members of your department who will resist changing. When we were upgrading to the correct equipment I came up quite a bit of opposition to the smoothbore nozzle. The M&M test McGrail explains in his book will help them see the light. If that doesn't work, take them to one of your older buildings, have them flow the line. After 45 minutes of seeing brackish water flow, not to mention the smell, they will soon realize that the fog nozzles are going to clog and clogged nozzles will kill firefighters. Also, you might check out the High-Rise Group. Maybe some of the discussions there will help you. Oh! One last point. I've been finding out that the pressure needed for the smaller lines tend to cause failures in combination sprinkler/standpipe systems. Those systems are only as strong as their weakest soldered joint, and boy do they make a mess.

I just came across your post about 2 1/2 after a small dispute about friction loss. would love to see your PP. Thanks Jeff

frostywite@aol.com

Robert Owens said:

We also have both. Typically we use the 2 1/2 for large commercial occupancies that are uncompartmented, and anything with stand pipe operations.

We use the 1 3/4 for leader lines (which we deploy mostly on multi family dwellings), and small compartmented commercial occpancies like food service etc.

I love the 2 1/2 and think it is one of the most underutlized and trained on tools in the fire service.

Shoot me your email and I will email you the Power Point presentation we used to introduce it to our FD and all of the testing we did with it.
Jeff, buy David McGrails book Standpipe Operations from Penwell.  You will never need to read another book about the subject.  All your answers too anyone's arguments will be addressed there.

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service