Hey fellas, I have bit of a technical question about smoothbores. I have won the battle at my volley house, and we are purchasing a handful of smoothbores. I was basically getting the Akron FDNY spec nozzles until one dealer said to step up my 1 ½” nozzle. FDNY spec (and correct me if I’m wrong Capt. McCormack) are 1 ½” inlet w/ a 1” orifice and 1 ½” outlet w/ 15/16” tip. That is the nozzle I wanted, but one dealer told me to step up the orifice size to 1 3/8”. I was thinking the bigger orifice may cause more turbulence and lack of a better water stream. Anyone with insight or proven methods please let me know.