Fire Engineering Training Community

Where firefighters come to talk training

Carmody Combustable Hazards training kit

We have a Carmody Combustible Hazards training kit that we found in our training locker and we would really like to use it. The problem is that there are no instructions with the kit. I have done a search on Google and other web sites and found very little information. I am hoping that somebody on Fire Engineering’s community has used or currently uses the kit and could be of assistance. Thanks in advance.

Views: 5667

▶ Reply to This

Replies to This Discussion

Permalink Reply by Glen Carter on August 22, 2011 at 9:56am

Chris could you e-mail me a copy of the manual as well at gcarter@justritemfg.com

 

Thank you Glen Carter

andhiyono suroso said:

I have two sets Carmody in my sites which have no instruction manual
would you please send a copy of the instructions to me also to andhi2501@gmail.com?
Chris Steeves said:

Patrick-
I have not been able to find one for sale anywhere, not much info on internet either. I could email you a copy of the manual and you could probably buy all the pieces from a lab supply store. I think the trainer is great you can really teach fire chemistry with it not just tell the students about it.
Chris
Permalink Reply by Kobus Loubser on September 6, 2011 at 10:06am

I can see that this thread has been active for over three years now so I hope that someone can help in supplying an Instruction manual for the Carmody Model CHT-700-C.

 

Mail to: j.l@vodamail .co.za

 

Much appreciated

Permalink Reply by Gordon Haynes on October 9, 2011 at 12:07pm

I would also like to see if I could get a copy of the manual. I teach at two seprate Fire acadmeys and also assist our departments training staff for a 400 + member department. We can always use a new method of presenting ideas to the department and like to keep it interesting for the students. This sounds like it would beat them looking at power point slides. My email is Ghaynes@mylubbock.us for the city or my private email is firemanhaynes@sbcglobal.net

Thanks in advance, if your able to send this I will repost for you and become the next keeper of knowledge for awhile for you so you are not having to always respond to the request.

G Haynes

Permalink Reply by Les Whalen on October 20, 2011 at 9:42pm

Bill,

I'm sure you have already sold yours but asking never the less-- just in case--let me know--

Chief Les Whalen

Williamstown Vol FD

859-743-0857

William J. Fries said:

I have two Carmody Combustible Hazards Trainer sets that I used years ago when I did private consulting/teaching at various fire schools. It is a great tool for instructing fire chemistry. One is in like new condition and is complete, including the manual. This probably isn't the proper forum for selling equipment, but if someone is interested, feel free to contact me, as I may be willing to part with one.

Bill
Permalink Reply by Greg Ferrell on October 21, 2011 at 8:06am

Mr.Fries

If you would happin to still have or know where I could find one of these kits and instructions please let me know.I am a new fire Intructor and would very much like to get one. If nothing else maybe I could get a copy of the instuctions. Thank you

  gsferrell@yahoo.com

   1 740 645-7716

 

Permalink Reply by Chris Steeves on November 19, 2011 at 2:05am

Sorry it has taken so long to respond to some of the request.  I misplaced my copy and could not remember where I had saved the electronic version.  I am uploading the PDF version hopefully this will work for everybody.

 

 

Attachments:
Permalink Reply by Thomas E. Snyder on February 28, 2012 at 1:22pm

I saw you posting for th Carmody kit and was wanting to know if you could e-mail me a copy?  We have a Carmody kit but all the guys that used to use it have long retired.

 

Thanks,

 

Tom Snyder

Louisville Fire Department

Permalink Reply by Henry Gruba on January 28, 2015 at 11:54am

Hello.  Yes I am reviving an old thread!  I am looking to purchase a Carmody Combustible Hazards Trainer.  Mr William Fries, who was in this thread above had two for sale.  Do you still have them?  Or anyone else?  Thank you very much.  Henry Gruba   ruvoli.gruba@sbcglobal.net

Permalink Reply by Jay Reynolds on June 4, 2016 at 7:11pm

I have a Carmody Combustible Training Kit - Model 700C.  I would like to sell this kit since I no longer do any teaching.  The kit is in very good condition and I have a clean copy of the users manual.  

Permalink Reply by Glen Carter on June 6, 2016 at 7:04am

Jay,

I am interested. Please call at 1-800-798-9250 ask for Glen Carter to discuss the details.

Glen

▶ Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


 Check out the most recent episode and schedule of UPCOMING PODCASTS

Podcast Archive

The Command Post: Size-up and the 360

Fire and Training: How the built environment is affected by weather events.

The Professional Volunteer Fire Department: Winning With the Engine You Have

Back Step Boys: Lithium-Ion Batteries, OSHA, and More

In the Books: Sprinkles

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service