Fire Engineering Training Community

Where firefighters come to talk training

I'm looking for examples of SOG's on High Tension Cable Barrier Systems.

Views: 306

Replies to This Discussion

Hi Todd.
Did you looking for SOG/SOP for this topic?
Can we relief the tension of this cable in the "join point"?

Stay safe
Adolfo
Although it's not a SOP, I found interesting this article that treats these theme, it contains very ilustrative videos. Below is the link


http://minnesotafireservice.com/whatsnew_high_tension_cables.html


Best regards,
Cristóbal Mena A.
Dear Cristobal:
Thank you very much for this useful information.

Stay safe
MOTOR

note: for all of you, this guy is a partner in my volunteer fire station...(we need to improve the communication inside...jajaja)
AND ALSO REPLY TO OTHER CITIES IN CHILE...
GREAT MAKINA

Adolfo Grillo said:
Dear Cristobal:
Thank you very much for this useful information.

Stay safe
MOTOR

note: for all of you, this guy is a partner in my volunteer fire station...(we need to improve the communication inside...jajaja)

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service