Where firefighters come to talk training

RIT 1407

Anyone have the skinny on what the soon to be out NFPA 1407 concerning RIT is going to contain or how it is going to be layed out?

I don't have patience to wait till 2010.

Be safe all,

Joe

▶ Reply to This

Replies to This Discussion

Permalink Reply by Chris Piepenburg on July 8, 2009 at 3:44pm

Joe,

Check out this link and go to page 15 and it is the proposal for what NFPA 1407 will look like.
http://www.nfpa.org/Assets/Files/PDF/ROP/1407-F2009-ROP.pdf

▶ Reply

Permalink Reply by Joe McClelland on July 8, 2009 at 8:26pm

Thank you so much Chris.

▶ Reply

Permalink Reply by Gary Rauch on July 9, 2009 at 9:38am

Hey Joe,

It will say that we need more manpower to complete the tasts at hand, so we would need the brothers that are layed off or the ones that have not been replaced to full fill the tasts of the position that won't get done. BE SAFE!

▶ Reply

Permalink Reply by Joe McClelland on July 9, 2009 at 3:47pm

As always,
I thank you for your help Gary.

▶ Reply

▶ Reply to Discussion

RSS

Welcome to
Fire Engineering Training Community

Sign Up
or Sign In

Or sign in with:

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.