Fire Engineering Training Community

Where firefighters come to talk training

September Simulation- Tool and Dye Factory

Hello, we are back to simulations after a month off, I will attempt to get a couple of sims out a month, again if there is a particular simulation you wish to see send me an email at efdchief3@outlook.com. In this particular simulation you have a fire in a legacy constructed building constructed in early 1900s, I have attached some thoughts to consider and also attached a kitchen table handout with still frame shots of the building to discuss with your members. Some key points again to consider:

A-Life Safety

B-Construction- S.U.T.E.- Size, Use, Type, Era (Hint... 1901)- Large OPEN AREA,  and OLD, what kind of roof supports might this building have??

C-Attack thoughts, Exposures, options

D-Ventilation?

E-Apparatus Placement/Command Post Location?

9/2/15 F.E. Kitchen Table SImulation .pdf

Views: 566

Comment

You need to be a member of Fire Engineering Training Community to add comments!

Join Fire Engineering Training Community

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service