Where firefighters come to talk training

Light Box Instructions - Where's The Training

Last night I was sent the picture below. Let me first say that this particular light is not on a fire apparatus. We had a little bit of discussion about the labeling on Facebook and figured the topic was worth sharing. Here’s what the label says if you can’t read it in the picture: #1 Push black release on bottom #2 Pull upward on flashlight. Check out the picture and think for a moment about training. Then scroll down for a few more thoughts. Read on.

Pass it on!

< Previous Post

Comment

You need to be a member of Fire Engineering Training Community to add comments!

Join Fire Engineering Training Community

Welcome to
Fire Engineering Training Community

Sign Up
or Sign In

Or sign in with:

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.