Here’s a piece brother firefighter Charlie Hillman (Norwalk (OH) FD) wrote about a chimney fire last winter. He brings up several fireground basics that we all should remember. Pass it on!
On Wednesday, January 26, 2011 at 0850 hours the Willard Fire and Rescue department was dispatched to a chimney fire. The chimney fire was reported in a 1 ½ story wood-framed, single family dwelling, ranch style home. Upon arrival the supervisor initiated incident command and a performed a 360o size-up and radioed that there was heavy white/gray smoke issuing from the chimney. The homeowner had been attempting to clean the chimney with a homemade device that consisted of a long piece of copper tubing with a brush attached to the end of the tubing. The tubing was connected at the top of the chimney with a long piece of chain. The supervisor ordered the engine crew to ladder the roof to remove the burning brush from the inside of the chimney.
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
45 members
116 members
62 members
73 members
166 members
65 members
277 members
510 members
10 members
106 members
© 2024 Created by fireeng. Powered by
FE Home | Product Center | Training | Zones | Fire-EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue |
You need to be a member of Fire Engineering Training Community to add comments!
Join Fire Engineering Training Community