Added by Isaac Frazier on April 28, 2014 at 7:24pm — No Comments
When securing battery power, quickly scratch through the letter B (on hood). This allows arriving units to see that battery power has been secured (This is not used on lightly damaged fender benders). This method is a good alternative to leaving the hood up, as it doesn't obstruct your view of the scene.…
ContinueAdded by Isaac Frazier on April 28, 2014 at 7:20am — 2 Comments
As a good rule of thumb, cutting vehicle posts within 4 inches of the roofline or 4 inches from the rocker panel, will greatly increase your chances of boron/high strength steel avoidance.…
ContinueAdded by Isaac Frazier on April 21, 2014 at 8:44am — No Comments
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
45 members
116 members
62 members
73 members
166 members
65 members
277 members
510 members
10 members
106 members
© 2024 Created by fireeng. Powered by
FE Home | Product Center | Training | Zones | Fire-EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue |