Fire Engineering Training Community

Where firefighters come to talk training

Larry Glover's Discussions (69)

Discussions Replied To (9) Replies Latest Activity

"Thanks for the info Russ. I should have put in there, that they are adjustable gallo…"

Larry Glover replied Jan 17, 2010 to Solid Stream Nozzles

22 Jan 18, 2010
Reply by Russ Chapman

"We use the 100 psi Akron TurboJet 200 gpm's. Our policy states that we pump at 130 p…"

Larry Glover replied Jan 17, 2010 to Solid Stream Nozzles

22 Jan 18, 2010
Reply by Russ Chapman

"What pressure did you pump your fog's? We pump ours at 130 psi for 1 3/4" & our…"

Larry Glover replied Jan 16, 2010 to Solid Stream Nozzles

22 Jan 18, 2010
Reply by Russ Chapman

"Russ: It's not my call on the 3". For some reason they had us train on putting it in…"

Larry Glover replied Mar 13, 2009 to Solid Stream Nozzles

22 Jan 18, 2010
Reply by Russ Chapman

"Scott: I've had the privilage to go through our flashover simulator and have used di…"

Larry Glover replied Mar 8, 2009 to Which nozzle for fashover?

39 Jan 13, 2012
Reply by Timothy Patrick

"We use 1 1/4" on all our 2 1/2" lines. On our Engine, we have an "apartment load, Sa…"

Larry Glover replied Mar 8, 2009 to Solid Stream Nozzles

22 Jan 18, 2010
Reply by Russ Chapman

"My department like most mentioned run with 3 man engine co.'s and we have one ladder…"

Larry Glover replied Feb 15, 2009 to First due and no truck in sight...

16 Mar 1, 2009
Reply by Ricky Teter

"I agree also. In fact I faced this problem about 2-3 weeks ago at a church fire that…"

Larry Glover replied Oct 27, 2008 to Beyond The Pre-connect

21 Nov 8, 2008
Reply by Art Zern

"We run a 3-man engine co. at work and on all alarms it is now policy for all compani…"

Larry Glover replied May 30, 2008 to Who usually stretches your first line?

4 Jun 4, 2008
Reply by Robert Owens

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service