Fire Engineering Training Community

Where firefighters come to talk training

Larry Glover's Discussions (69)

Search Forum

View

Discussions Replied To (20) Replies Latest Activity

"You are exactly right Jason.  I've run into the problem that some instructors believ…"

Larry Glover replied Jan 20, 2011 to Opening the Nozzle in Smoke

 125 Apr 18, 2011
Reply by Pierre-Louis LAMBALLAIS

"Confusion is right. Reading Marques Bush's post about the Flashover instructors teac…"

Larry Glover replied Feb 28, 2010 to Opening the Nozzle in Smoke

 125 Apr 18, 2011
Reply by Pierre-Louis LAMBALLAIS

"Thanks for the info Russ. I should have put in there, that they are adjustable gallo…"

Larry Glover replied Jan 17, 2010 to Solid Stream Nozzles

 22 Jan 18, 2010
Reply by Russ Chapman

"We use the 100 psi Akron TurboJet 200 gpm's. Our policy states that we pump at 130 p…"

Larry Glover replied Jan 17, 2010 to Solid Stream Nozzles

 22 Jan 18, 2010
Reply by Russ Chapman

"What pressure did you pump your fog's? We pump ours at 130 psi for 1 3/4" & our…"

Larry Glover replied Jan 16, 2010 to Solid Stream Nozzles

 22 Jan 18, 2010
Reply by Russ Chapman

"He said that his hood was on and that his flaps were down. I asked him twice what pa…"

Larry Glover replied Nov 2, 2009 to Opening the Nozzle in Smoke

 125 Apr 18, 2011
Reply by Pierre-Louis LAMBALLAIS

"I'm bringing this one back to the top. My volly company just experienced this situat…"

Larry Glover replied Nov 2, 2009 to Opening the Nozzle in Smoke

 125 Apr 18, 2011
Reply by Pierre-Louis LAMBALLAIS

"Know your area Know your rig Know your crew and who's coming to assist Know building…"

Larry Glover replied Apr 13, 2009 to What "Rules" Do You Believe Must be Followed In The Engine?

 12 Jun 15, 2009
Reply by Kristopher Holien

"Russ: It's not my call on the 3". For some reason they had us train on putting it in…"

Larry Glover replied Mar 13, 2009 to Solid Stream Nozzles

 22 Jan 18, 2010
Reply by Russ Chapman

"Scott: I've had the privilage to go through our flashover simulator and have used di…"

Larry Glover replied Mar 8, 2009 to Which nozzle for fashover?

 39 Jan 13, 2012
Reply by Timothy Patrick

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


 Check out the most recent episode and schedule of UPCOMING PODCASTS

Podcast Archive

Hooks and Hoses: Sean Duffy

Tactical Impact: Jonah Smith

Sons of the Flag Radio: 3FTL

Back Step Boys

Tailboard Talk: Resiliency and Peer Support

Groups

© 2023   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service