Fire Engineering Training Community

Where firefighters come to talk training

Brandon Krause's Discussions (14)

Discussions Replied To (16) Replies Latest Activity

"If staffing allows, you may want to consider using engine personnel to check for and…"

Brandon Krause replied Aug 3, 2010 to Kinking problems with smooth bore lines:

7 Aug 4, 2010
Reply by John Rigney

"We used a chart so that we could be as accurate to the manufact. specs as possible.…"

Brandon Krause replied Jan 17, 2010 to Solid Stream Nozzles

22 Jan 18, 2010
Reply by Russ Chapman

"We did some testing with both SB and fog nozzles. We found that the SBs were right o…"

Brandon Krause replied Jan 16, 2010 to Solid Stream Nozzles

22 Jan 18, 2010
Reply by Russ Chapman

"We too use the Cleveland for our wildland packs (its a Travis Co. thing). We did try…"

Brandon Krause replied Sep 25, 2009 to "Cleveland Load"

12 Jun 6, 2014
Reply by Mark Lee

"The fog portion only slides with some force, I have never seen one open accidentally…"

Brandon Krause replied Jul 3, 2009 to Which nozzle for fashover?

39 Jan 13, 2012
Reply by Timothy Patrick

"We will go out to the apartment complexes and practice laying lines for various atta…"

Brandon Krause replied Jun 14, 2009 to Drilling on stretching in actual occupancies

6 Jun 17, 2009
Reply by Jim Miller

"Has anyone used the lightweight 2 1/2 for highrise?"

Brandon Krause replied May 10, 2009 to 2 1/2 in the High Rise Pack??

10 May 16, 2009

"Joe, I would run several drills with different crews to see which works best for you…"

Brandon Krause replied May 6, 2009 to 2 1/2 in the High Rise Pack??

10 May 16, 2009

"We run with 3 man engines quiet often in our department and an exterior attack is wh…"

Brandon Krause replied Mar 18, 2009 to water "pushing" fire

16 Jan 23, 2012
Reply by Timothy Patrick

"I think Lloyd Layman was a smart guy, but unfortunatly we have the technology and kn…"

Brandon Krause replied Mar 4, 2009 to Which nozzle for fashover?

39 Jan 13, 2012
Reply by Timothy Patrick

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service