Fire Engineering Training Community

Where firefighters come to talk training

Although we all have these in our areas, we need to occasionally take a look at these occupancies and discuss and prepare for the hazards contained in these buildings.

As we can see in this picture, the car lift is holding a vehicle in the air. We know that when they close, these cars remain elevated.

Most of the time this is not an issue, but when a fire happens or if the area fills with smoke, it can be dangerous for firefighters entering the building.


There are also floor level and pit hazards that need to be identified and planned for. These should be identified during inspections and pre-planning surveys.

Be aware and stay familiar with your area and the buildings that you will be responding to.

Stay safe and look at these buildings before they burn.

Views: 71

Reply to This

Replies to This Discussion

Here are some other hazards to be aware of esp. in Sear Automotive

Look at the local Jiffy Lube, speaks volumes!

Be Safe this holiday weekend!
Jeff

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2022   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service