Fire Engineering Training Community

Where firefighters come to talk training

Just read John Murphy's piece online.

http://www.fireengineering.com/display_article/345002/25/none/none/...$FireEngineeringEnl

While the focus of the discussion in the article was the 1001 with a "shout out" to the 1403 I wonder if the "standard of care" for the standards applies equally and universally across the various standard sets? Training, operations, prevention, etc.

Secondarily, IF you have a good, sound, answer for the "if not, then why not" question is the potential for liability decreased substantially? Is it a sliding scale? Does this basically become a Risk VS. Benefit equation?

Views: 39

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service