Fire Engineering Training Community

Where firefighters come to talk training

Anyone have the skinny on what the soon to be out NFPA 1407 concerning RIT is going to contain or how it is going to be layed out?

I don't have patience to wait till 2010.

Be safe all,


Views: 347

Reply to This

Replies to This Discussion


Check out this link and go to page 15 and it is the proposal for what NFPA 1407 will look like.
Thank you so much Chris.
Hey Joe,

It will say that we need more manpower to complete the tasts at hand, so we would need the brothers that are layed off or the ones that have not been replaced to full fill the tasts of the position that won't get done. BE SAFE!
As always,
I thank you for your help Gary.

Reply to Discussion


Policy Page


The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.


Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail

FE Podcasts

Check out the most recent episode and schedule of

© 2022   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service