Where firefighters come to talk training

LDH Manifolds

I am starting research on manifolds to write a two to three hour class to present to my department and area departments that use 5 inch hose. I have some information coming from ifsta and some manufacturers but would like any ideas to make the class a knockout. Thanks

▶ Reply to This

Replies to This Discussion

Permalink Reply by kent henson on August 1, 2009 at 5:43am

http://www.firefighternation.com/group/trainerscorner

Here's a link to my class. I hope you can download it. feel free to use as you need. Any feedback would be appreciated!

▶ Reply

Permalink Reply by Larry Lasich on August 1, 2009 at 11:29am

Thanks for doing that!
Larry

▶ Reply

Permalink Reply by kent henson on August 1, 2009 at 11:38am

Glad to do it. I just hope it proves useful. UPSing copies got a tad pricey. lol

▶ Reply

Permalink Reply by Adam Wiles on September 14, 2009 at 3:42pm

Great info kent. Thanks for sharing!

▶ Reply

Permalink Reply by kent henson on September 14, 2009 at 5:05pm

Hope it proves useful! Thanks for the add!

Adam Wiles said:

Great info kent. Thanks for sharing!

▶ Reply

Permalink Reply by Jim Saldutti on September 17, 2009 at 6:46pm

Nice job on the Class, Kent. The attached article shows a little different slant on manifolds. It features Rumson, New Jersey's new manifold truck. It's not a mini-pumper - it has no pump or tank. It's a 2000 gpm "manifold on wheels" that carries its own dual bed of 5-inch hose, master stream devices, attack lines, 10kw generator and tools. Rumson has areas with limited access for larger vehicles including large homes with long narrow driveways, and bridges and boardwalk with weight restrictions. May be of interest to your class.

Attachments:

Rumson Mighty Manifold.pdf, 427 KB

▶ Reply

▶ Reply to Discussion

‹ Previous
1
2
Next ›

RSS

Welcome to
Fire Engineering Training Community

Sign Up
or Sign In

Or sign in with:

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.