Fire Engineering Training Community

Where firefighters come to talk training

The Colony, Texas Fire Department's Training Yard with a modified Hanover Saving Our Own prop with vertical vent and forcible entry props added.  This was site built from scratch so only pictures are available. Total cost less than 10K. 

Drills: (2) Denver and wall breech, stairs, ladder and personal rescue device bail, Columbus drill, reduced profile SCBA confidence, vertical vent, (7) forcible entry challenges. VEIS and 2nd story ground ladder rescue.

Views: 1215


Replies to This Discussion

Hi Scott

 That prop looks great,one question though, is there space at the top of pitched roof to set roof ladders over the "peak"? Maybe add some more pictures of other features? Thanks Harry

Yes there is a space for the roof ladder hooks.  More pics to follow.


Policy Page


The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.


Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail

FE Podcasts

Check out the most recent episode and schedule of


© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service