Fire Engineering Training Community

Where firefighters come to talk training

Anyone have a good air management drill...lots of requests

Views: 200

Replies to This Discussion

I read one on FE site (I think that is where we got it) called the 500 lbs drill. Give a firefighter a bottle with 500 lbs of air and make him work (simulating self extrication from a building under mayday situation) while timing duration of remaining air (all the way to mask sucked to face).
Then give him a second 500 lb bottle and allow him to await rescue with a timer encouraging all of the air conservation measures (simulating RIT accessing and freeing firefighter in mayday distress).
This is a good way to teach guys why we top our bottles off to 4500 instead of accepting 4000 as "enough" at the start of the shift.
Outstanding....we all need to learn this lesson.

RSS

Policy Page

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/archive/.

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2020   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service