Fire Engineering Training Community

Where firefighters come to talk training

In our department, The first due Operator usually pulls the first line. The reason for this is with a 3 person engine and no truck company, the Captain does a 360 walk and the FF sets up for forcible entry. This leaves the Operator to pull a pre-connect to the front door. Although I do not believe the pre-connect is always the right line, it is the most common stretched line we have.

What do YOU do?

Views: 123

Replies to This Discussion

We run a 3-man engine co. at work and on all alarms it is now policy for all companies to respond. That means, we get 1 truck co., 2 additional engines and a Batt. Chief. (We have 3 stations-4 companies.) If we are first due, I'll pull the attack line and flake it out myself while the Capt. investigates. Unfortuantely, it is not a common practice for members to carry tools (this is my biggest pet peeve--CARRY TOOLS!!). The Engineer is suppose to check the hose bed and check for kinks behind me.
We also run 3 man engines, but they usually arrive with (or at least in close succession with) a second piece (2 man brush pumper). Our crew has assigned riding positions, one of which is the nozzlman. The Engine boss also does a 360, the pump operator is responsible for correct engine placement, water into the pump (and charging the line when ordered), and all the line with the exception of the nozzle side 50ft (we have 200ft crosslay pre-connects). Then nozzleman is responsible for getting the nozzle and his 50ft of working line (or more if the stretch warrants it) into the correct position indicated to him by his officer (usually the front door). The two person second piece is responsible for the door, and then they fall into position on the line for the attack. We are currently in the process of putting truck companies (dedicated) back on track (thank God), so the FE position may fall to them in the future, leaving the second piece to help get the line into place more efficiently.
The firefighter on the engine stretches the first line while the officer does a 360 walk around. We run 3 man engine and truck companies. Our ambulance company will bring the irons incase we need to force entry.
The nozzle firefighter (backwards facing directly behind the officer) always stretches the line and the driver assists in clearing it from the bed and flaking it out. The driver also grabs the Irons off the engine and takes them to the front door. Once the officer finishses his 360 if the Truck company hasn't already forced the door the officer and firefighter will team up and force it. It works pretty good with 3 man staffing you have to get creative.

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service