I have been asked by a member of our department's high-rise committee (my Captain) to research and replace the search markers. The intent of these markers is to issue them to firefighters to place in there turnouts. We now have lumber crayons that came with a nice metal holder but they are drying out. Does anyone have some suggestions? Is there a new product out there that might not have been around when we last purchased markers?
Thank You for your time!
Lt. Jesse Parry
Portland Fire & Rescue
Truck 04
Tags:
Thanks, I like the reflectivity idea. We currently have paintstik Markers made by "LA-CO Markal" They are Fluorescent Pink and they have a metal tube that you put them in. The problem is once you start marking how do you advance the paintstik through the metal tube. We are thinking about having a wooden dowel to push the stik through. We are also looking for a lanyard and carabineer to attach the system to an SCBA strap when being used.
JP
Here are two options that I found, the wooden one comes with a strap and the aluminum one has a clip. I'm not sure how you advance the chalk or the grease pen down the tube though. As far as attaching them to the SCBA, you could use one of those retractable key chains that the janitors had when I was in highschool.
Aluminum chalk holder (this link had a weird facebook pop up message, up to you if you want to click it)
Stay safe brother!
John
-These conversations always sound great when they take place outside of the firehouse. There are always feasible sounding ideas and cost effective sounding ideas but no one ever has suggested an idea that works on the street and is practical to the firefighter searching the floor.
-First and foremost, if you have never performed a real primary search in a real and occupied high rise occupancy, under real fire conditions, than sure... a piece of chalk or crayon to draw pictures on the doors sounds great. But now think like the man doing the actual search... the company that has just walked up six flights of stairs, carrying too much gear because of short staffing, wearing structure firefighting gloves and listening to the dispatcher or IC relay multiple calls from people trapped in apartment number XXX while they hear via radios that the engine is still working on water supply and access issues. Really?!?! You gonna find a piece of chalk or a crayon in your pocket and take the time to do a drawing?!?! Really?!?! If you think so you haven't done this for real. Be serious.
-With all the gear fireman are forced to carry is it even realistic to think that someone is going to carry detergent bottle pieces or door markers or plastic wild land type flags to tie on doorknobs in pretty bows? How long will this crap last in a pocket? Is it retrievable and useable while wearing structure gloves; while carrying the Irons and a hook or a rabbit tool; the A tool, a bag of rope and a can??? While also wearing ppe, flashlight, radio, scba and escape harness?
-O and ps, what about the speed necessary for the search to truly be a primary search with the possibility of maintaining the hope of a rescue? Who the hell has time to draw on doors? Who sees these neolithic cave drawings in smoke/limited visibility?
-How about the IC tracking companies that announce their progress via portable radio? How about companies sticking to their assigned tasks? Preplanning and walk thru inspections of the high rise? Anyone, anyone?? Buelller???
-And if you really, really need a marker on the door... maybe a real firefighter can use the Halligan or axe to knock off the inexpensive and easily replaced door knob on the way out of the occupancy after the occupancy has been searched? That way if another company shows up to perform a redundant search the errant and/or freelancing firefighters will see and feel the missing doorknob when they attempt to enter the room and instantly realize the occupancy has already been searched.
-Worried about doorknob damage?? Don't be; you probably had to force the door to the occupancy anyway. Got another idea??? Is it practical and useable at 3am in the real world of overworked and over burdened firefighters operating at very dangerous and fast moving fires that create limited visibility on upper floors of inaccessible high rise buildings?? Think real world.
-Ray, I never implied that. This is a "real world" pet peeve of mine and usually elicits a response in proportion. To many firefighters and officers over think this issue. What may work well at administration in a memo or the training division bulletin does not always translate to the street.
-Sometimes I think those who write policy or training bulletins should have to perform said tasks before they push the send button on the computer.
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
45 members
116 members
62 members
73 members
166 members
65 members
277 members
510 members
10 members
106 members
© 2024 Created by fireeng. Powered by
FE Home | Product Center | Training | Zones | Fire-EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue |