Fire Engineering Training Community

Where firefighters come to talk training

Ventilation Training taken to the next level.

www.ventmarker.com

Views: 1144

Reply to This

Replies to This Discussion

This would be used for training..outlining the cuts?
I can see using this tool for initial ff training as a crawl,walk, run evolution... but I really think that we should train like we work.
Yes, when you give them the saw for the first time, your explaining why and where the h*** is going and how big or small the h*** needs to be. They get to feel the weight, understand the balance of the saw. They see what there doing and the instructor gets to see them do it with out having to cut a real h*** yet.
Our company is in the process of developing that as we speak. This does give the most realistic practice you can get with out cutting on the real deal. Take the chain off and you can go through all the motions.
I can agree with you that we should train like we work and that is what you are doing with this training aid. It is very much ideal for the new recruits coming in to the job. But how often do we get the chance to cut on real buildings other than a roof prop in our training prop cities if you have them? This tool allows Engine or Truck companies to stop at buildings in there response areas and go through the step like a pre-fire inspection. You can ladder that commercial building get on the roof and mark it up. Then wash or brush it off and you won’t get in to trouble for graffiti.
Great idea!!!!!
Andrew, As you know, we have used your product in the trail phase of training in the Truck Academies we provide nationwide. I will say the overwhelming number of studnets enjoy and apprieciate the devise as a training aid. We have places the device on Truck 37 as a training aid for roof drills on area occupancies. THis has lead to a more realistic training environment. Thanks again...

Ed Hadfield
Firetown Training Specialist
firetowntrainingspecialist.net

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service