Fire Engineering Training Community

Where firefighters come to talk training

Im new to leather helmets however im experienced in leather i.e saddles and horse tack. Something has been bothering me over the debates on how to paint leather. I find nothing wrong with painting a shield however it makes me cringe when people talk about painting leather helmets. The problem with this is that leather needs to be oiled regularly to prevent it from drying out and becoming brittle. If your going to redo a helmet please please please dye the leather dont paint it.. I see in topics how guys cant remember hitting their head yet a chunk of leather is missing, it wouldnt take much to chip a good chunk off of a dried out leather helmet. When was the last time you broke a piece of leather off of your station boots? These helmets are a huge investment and the best way to keep your investment in good shape and have it last years is simple make sure its treated regularly with leather products such as "doc baileys leather treatment" nets foot oil etc. I know alot of you wont agree with this but it makes sence, I also was talking to my saddle maker earlier today and was discussing this with him and he just cringed at the thought of painting leather. My advice please dont do it. Although helmets are a big investment saddles are an even bigger one, when was the last time you ever saw a painted saddle? Good quality leather products such as conditioners and dies can be purchased at any saddle shop website some good ones i have found are valley vet, chicks saddlery, country supply, jeffers  and  horseloverz.com. Please make your investment last and dont paint it.

Views: 19394

Replies to This Discussion

If you dont want to order it, you might be able to get it from a local sign shop, you will want to find one that still does hand lettering or pin striping though.

Shawn Tibbitts said:
You can find 1 shot at dickblick.com or www.artsuppliesonline.com , just to name two, or usually you can find it on e-bay as well.

Brad Hoff said:
I just bought some supplies last night at someplace called home depot but I should have gone to Lowes! It cost about 40 bucks for foam brushes, boiled linsed oil ($23, most exspensive item) PC Farenheit (for the cracking) since I couldn't find any PC-7. Looks like I will have to order the One Shot paint, only place is in Anchorage or I can get it from The Fire Store, anyone know any others?

Ben where did you acquire yours?
-Shawn, the painting of leather helmets dates back to the creation of the helmet and it is a way to protect the helmet as well as change the appearance.
-As to your suggestion of treating the leather with oils, salves or treatments, this is something that the manufacturer specifically says not to do. This will weaken the leather that has been specifically treated with a resin to make it as hard as wood during the manufacturing phase. Many years ago I had acquired a leather helmet and used a leather treatment on it to restore the leather of the helmet. I eventually ruined the helmet in so doing.
-My best advise is to say that though you have experience with leather, dealing with leather helmets is very different and unique to anything you may have experienced and I suggest following the manufacture's advise specifically and to the letter.
-Because the leather helmet has been treated with a resin that creates the consistency of wood, painting the helmet is appropriate and protects the helmet. Any doubts can be addressed by Cairns; they've been doing this for over 150 years.
Here are a few pics of my lid during the stripping proccess. I know it looks a bit hideous and inhumane but it had to be done. All the paint is off and is now down to bare leather. I have applied a few coats of boiled linseed oil since these were taken and I'll add a few more coats this week and post some pictures later.

I would have loved to keep my helmet this plain leather color because it looks so natural and almost has a wood grain quality.


Here is the first coat on "One Shot" mixed 1 part paint 2 parts Linseed oil.

-Brad it looks like the stripper softened up the leather, was that the case or did the leather remain hard?
-Last time I had to do this I followed the same procedure as Cairns and sanded prior to repainting. I'm interested in learning if the stripping is a better approach, especially around the stitching which is always harmed with sanding.
-My biggest concern would be the stripper causing the leather to soften in any way.
-Dave, I looked up the Citristrip stuff you have in the photos. Seems like a nice product to use for this work, not as aggressive as a chemical stripper. I will certainly consider it in the future.

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service