I would repost this in the Leatherheads Group and you should get some feedback. The hard part is the brass rim that holds it in and it's a repair that if you do yourself, may void the warranty or any issue if you were to get hurt or worse killed bcause the helmet malfunctioned. In my opinion I would let the factory or someone who is qualified to do repairs to under take that task since your life depends on your lid.
I thought I had a article from MSA on helmet repair and now I can't find it...ugh! It says you can send it back to the factory, which I believe they are doing repairs in NC. You can call the MSA factory customer service line for instructions. I know it's about 50 bucks or so depending on what needs to be done not including shipping. I included the manual and on pages 9-14 it covers maintenance. Page 13 talks about leather repairs.
-Brian, I have changed the liner on several leather helmets and its not that hard. It seems intimidating at first but it is rather easy. Drop me a line on my page and I can give you the step by step.
-Changing the suspension system is a little more challenging but not to bad either. Patience is a must because though it is rather easy it is tedious and very time consuming; couple of hours.
-If you aren't comfortable doing the work there are a few options. smokeshowing.net is one or the factory is another. Both expensive and take a lot of time.
-Doing the repairs or changing the liner yourself is not that difficult, just time consuming, but not nearly as time consuming or expensive as paying someone else to do it. Personally I enjoyed the work and in the end the helmet was back in service much faster.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail firstname.lastname@example.org.