I spoke with the Harrison people this week. They have been working on our PPV fan issue for quite some time. After extensive testing, they are convinced it is a fan issue and not a generator problem. They have contacted other generator…"
"If staffing allows, you may want to consider using engine personnel to check for and fix kinks. Many time we use the back up or door guy for this, even with min. staffing it doesnt take much! Fyi we use 200' 1 3/4" with a 15/16ths tip."
Thanks for the reply. We still have about 30 sections of the Ponn Supreme hose, so if replacing the nozzle section doesn't work, it's back to the old standby. I will say that the Angus 2 1/2" seems to work well so far. Another…"
We just evaluated and bought 1.75" hose for the purpose of flowing the 15/16" tip. Kinking was a testing factor and was greatly different amongst the 5-6 hose brand/models we tested. In the end we switched back from Ponn Conquest…"
it's interesting that you mentioned the Niedner hose. A neighboring Dept. had recently switched from Niedner to the Angus. I talked to a friend of mine there, and he told me that they had experienced trouble with the hose holding up. He…"
I just received an e-mail from the SuperVac company. The agree there is definitely a problem. Their chief engineer is working on a military project. Once he is finished with this project, he is going to start working on this. I will let you know what else we find out.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE. -- Bobby Halton
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail firstname.lastname@example.org.