Where firefighters come to talk training

Gary M Courtney's Blog (1)

Dry Hydrants

Having a difficult time determining the best practice for flushing/back flushing these installations. Believe that pressurizing them with an inch-and-a-half or larger is causing uncemented plastic fittings to come apart or to leak. Saw the comments about letting the "dust settle" and gravity feeding some portion of the tank water down the h*** before priming. We have milfoil trouble, is anyone doing anything about invasive specie? Thanks for any suggestions

Added by Gary M Courtney on October 9, 2010 at 1:37pm — No Comments

Latest Blog Posts

Dry Hydrants

Monthly Archives

2010

October (1)

Welcome to
Fire Engineering Training Community

Sign Up
or Sign In

Or sign in with:

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.