A basic system consists of a central control panel to which smoke alarms and heat detectors are connected, together with bells or horns & sprinklers that are activated when the system triggers an alarm. The control panel operates from the electrical system in the building and should contain an emergency battery which can operate the fire alarm part-system for about 24 hours during a power shortage.
The basic requirements for the number and locations of alarms depend mainly on the…
ContinueAdded by Hannah Stouterr on April 5, 2019 at 6:00am — No Comments
2019
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
45 members
116 members
62 members
73 members
166 members
65 members
277 members
510 members
10 members
106 members
© 2024 Created by fireeng. Powered by
FE Home | Product Center | Training | Zones | Fire-EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue |