Where firefighters come to talk training

Childs arm trapped in revolving door

Dispatched to an incident involving a child's arm trapped in a revolving door. There are two different pictures from totally different incidents to show a close up of the entrapment. Child says he cant feel his fingers. What are the options here?

▶ Reply to This

Replies to This Discussion

Permalink Reply by BRENT WEIR on June 24, 2014 at 2:09pm

easy to complex...

Is there some type of release to allow door to reverse? Someone working on that while...

4x4 wedges above and below, stacked on 2x4 cribbing if needed for thickness. Gently pound wedges to open gap...

If that doesnt do it, HP air bags... we have small one right in control case. spread and capture progress with wedges until arm is free.

Other options... halligan, rabbit tool, hyd spreaders... hell, if i saw this off duty, I'd have 10 of those bystanders push the door in reverse. Might get enough to free arm. Even cover kid with coats and break glass if last resort

▶ Reply

▶ Reply to Discussion

RSS

Welcome to
Fire Engineering Training Community

Sign Up
or Sign In

Or sign in with:

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.