Fire Engineering Training Community

Where firefighters come to talk training

Any one have a good spec for water storage tanks?? we are building a new station and are installing underground tanks for FF water.

We are working on a spec now based on NFPA 22 but could use some examples..



Views: 128

Reply to This

Replies to This Discussion

Hey Matt,

Below is a web site for FD under ground water storage fiberglass tanks, hope it helps. The tanks should meet NFPA standards !

Thank you. these are very good sites. for some reason we are and have used concreate vaults or poured in place vaults. we only have i think 1 set of fiberglass tanks. I will keep looking into this.

Again, thanks a ton.....


Reply to Discussion


Policy Page


The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.


Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail

FE Podcasts

Check out the most recent episode and schedule of

© 2023   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service