Tags:
easy to complex...
Is there some type of release to allow door to reverse? Someone working on that while...
4x4 wedges above and below, stacked on 2x4 cribbing if needed for thickness. Gently pound wedges to open gap...
If that doesnt do it, HP air bags... we have small one right in control case. spread and capture progress with wedges until arm is free.
Other options... halligan, rabbit tool, hyd spreaders... hell, if i saw this off duty, I'd have 10 of those bystanders push the door in reverse. Might get enough to free arm. Even cover kid with coats and break glass if last resort
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/archives.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE. -- Bobby Halton
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peterp@pennwell.com.
Generation Engine
with
Anthony Rowett, Todd Edwards, and Joe Ficarelli
CALL IN AND JOIN THE SHOW
1-877-497-3973 (Toll Free)
or 1-760-454-8852
Check out the schedule of UPCOMING PODCASTS
81 members
173 members
613 members
159 members
15 members
226 members
36 members
59 members
16 members
329 members
© 2019 Created by fireeng.
Powered by
Home | Buyer's Guide | Training | Zones | EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue | Community | Mobile |