Fire Engineering Training Community

Where firefighters come to talk training

I am interested in building a hose bed prop for my station. Anyone out there have plans or links to sites where I may find plans for hose bed prop construction? Rather than go through the road rash of starting from scratch, I thought I would throw this out there....

Thanks,

John

Views: 3146

Reply to This

Replies to This Discussion

An old Dept I was with measured for the typical hose bed and constrcuted it out of plywood or OSB (base) and 2"x4" boards for the sides. The "constructed" hosebeds were then placed on two to three saw horses, enabling the firefighter the ability to practice hose loads without tying up an apparatus. Once the hose has been laid, the firefighter must pull off the entire load for the next in line. If the bed came off the saw horse, you knew instantly that the hose was loaded incorrectly and the firefighter failed, and would have to reload the hose bed. Our dimensions are 10' long, 6-8' wide, and 4-8" height.

Nick
Thanks!

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service