Fire Engineering Training Community

Where firefighters come to talk training

Don't be knotted up when seconds count!

Today we share the simple tip that can save you seconds when the portable ladder is needed to be quickly deployed and utilized for rescue or access. 

"When a life hangs in the balance, the extra time
it may take to untie this knot is absolutely avoidable
and unacceptable. The rope likely has a memory and
has been sitting out in the elements, making it even
harder to untie.

Take the loose end of the halyard and tie it to the
one of the lower rungs on the bed section of the ladder. Make sure that the rope remains taut when doing so. Now when the ladder is removed and brought to the objective, the only thing you need to do is pull down on the halyard to extend the ladder into
position. Chapter 22, Page 256.

Take the time to evaluate your portable ladders and set them up for success on your next fire.

Views: 105

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service