Fire Engineering Training Community

Where firefighters come to talk training

From Jason Hoevelmann of Engine House Training, LLC

 

We have all been taught to take a tool with us anytime we get off of the truck. There are a multitude of reasons why, but this post will quickly address one use for your tool should you end up in a basement and need to get out.

The pictures show a haligan bar for this drill and is a common tool on most fire apparatus. With that being said, not all haligan bars are created equal and if you have one of those four footers, this will be difficult and if you have one of those short suckers, this will be difficult too. Not impossible, just difficult.

      

 

Start by planting the tool with the fork end down to the floor. Plant it hard to get a purchase point. Next lean the adz and pointer into the wall. This is all done below the window you found.

Now before you do all of that, you will need to clear that window with said tool. Be sure to try to make it as clean as possible, but don’t get real cute with it, you need to get out.

Lift a leg and put your foot on top of the tool against the wall. Grab the sill of the basement window and when your ready, push hard with your foot and pull with your arms and drive yourself out the window.

The key here is to at least get your center of gravity on the sill with the first push. You can wiggle and kick your way through the rest of the way.

With practice this can be done with other tools like a sledge or an ax, but the haligan works best. This is just one method we teach for self rescue from a basement or high window.

Train, practice and train some more. Stay safe and give this a try.

Jason

 

Views: 38

Reply to This

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service