Driver's Training Program

Replies to This Discussion

Permalink Reply by Larry Lasich on January 11, 2009 at 9:53pm

Are you thinking of cribing from1002 or working from a departments Driver/Operator class format?

• ▶ Reply

Permalink Reply by Gerry DiNunzio on January 12, 2009 at 11:00am

Yes a little of both. I just obtained a copy of 1002 and I'm trying to digest the 54 pages. I'm also looking for a few ideas from other Departments. We have two engines and two support pieces (No pumps, no water on the support pieces) so I know I can trim down some of what is in 1002.

Larry Lasich said:

Are you thinking of cribing from1002 or working from a departments Driver/Operator class format?

• ▶ Reply

Permalink Reply by david nadeau on January 12, 2009 at 11:56am

http://www.everyonegoeshome.com/resources/standdownresources.html

http://pweb5.targetsafety.com//fire/fleetsmart/

http://firechief.com/apparatus/firefighting_obstacle_course/

http://yourfirstdue.com/manager/data/1229686201/File/sample_sop_fir...

Check these site out

• ▶ Reply

Permalink Reply by Larry Lasich on January 13, 2009 at 8:48pm

Find someone with a copy of the IFSTA D/O Pumper or Ladder book and see if that will work for you. IFSTA also prints a work book to go with the manual so you can check their work.

• ▶ Reply

Permalink Reply by Glen Downey on January 14, 2009 at 9:12am

You might also want to consider the National Safety Council "EVOC II - Fire" course as a supplement to or basis for your course.

• ▶ Reply

Permalink Reply by Glenn Jennings on January 15, 2009 at 4:36pm

G'Day Gerry

If interested in what we are doing in Australia, I can forward our programs. Our programs are structured around both European and North American teachings. I agree that VFIS offer great programs.

• ▶ Reply

Permalink Reply by Gerry DiNunzio on January 15, 2009 at 4:59pm

You all have helped me a great deal Thank you very much. I never thought of the IFSTA D/O manual. As a matter of a fact our past chief is a D/O instructor.

Glen I'd love to see what you are doing in Australia. I can be email at gdinunzio@verizon.net



Glenn Jennings said:

G'Day Gerry

If interested in what we are doing in Australia, I can forward our programs. Our programs are structured around both European and North American teachings. I agree that VFIS offer great programs.

• ▶ Reply

Permalink Reply by Ron Taylor on January 15, 2009 at 5:11pm

Lt, DiNunzio,
I just found your request and would be willing to e-mail to you our driver training manual. Several years ago I was tasked with this same issue. My program is more geared to Ambulance Driver operator as the initial introduction to operating Emergency vehicles. From there, the students then learn how to operate fire deaprtment apparatus. I am constanly looking for ways to improve my class and would be interested in hearing your thoughts and comments on the program that I created. rtaylor@wrfr.com
Thanks for your time,
Ron Taylor
Capt. / Paramedic
WRFR

• ▶ Reply

Permalink Reply by Pascal Marchand on April 28, 2009 at 12:15pm

Hi Gerry

I've just seen your message that says your looking for info's on driver training program, I'm training instructor for my department and it's part of my job to train drivers and keep on developing the program. Let me know if you are still looking for suggestion or echange of ideas.

Pascal Marchand.
Longueuil fire dept. (Qc) Canada

• ▶ Reply

Permalink Reply by JJ Hastings on April 28, 2009 at 9:12pm

Thanks for asking this question Gerry, I'm in the same boat, if you don't mind, I'd like to glean off some of the information!

JJ

• ▶ Reply

Permalink Reply by James B O'Brien on June 9, 2009 at 11:55am

Gerry; Start with NFPA 1002, NFPA 1451; CDL Manual (DOT, FMCRegs CFR 49 sect 340-39x) ; that will lead you to what do others do. Depends on resources and personnel; but VFIS is most basic, although good; you must add much more; check out www.lacountyfirefighters.org. You will learn a lot in research, there are some great programs with progressive dept's; notably MCFRS, DCFD, FDNY, Charlotte NC and probably many more. Very basic start is USFA's free program, which I suspect VFIS is based on. I suspect the principals in development are the same in both organisations. As far as tools go, Vigil-Solutions and Smith Systems have great potential. I'll know soon enough. That's the direction we are heading in.

• ▶ Reply

▶ Reply to Discussion