Fire Engineering Training Community

Where firefighters come to talk training

being new to the fire service i would like to get a few ideas on some good all around personal carrying tools.

Views: 150

Replies to This Discussion

Hey John welcome to the best job in the world! I made a pouch out of 3 inch hose to carry my small tools. In it I carry a flashlight, a utility knife, wire cutters, 6 in 1 screwdriver, and a crescent wrecnch. I also carry a regular pocket knife hanging in my radio pocket. As far as other tools i carry I belive 2 hands 2 tools. So i carry a FUBAR the large one and a 10lb sledge on a 2 1/2 ft. handle. Make sure you have plenty of the departments flashlights with you that way you can lose theirs not yours.
thanks for the tips.any knowledge i can get i'll take.....

RSS

Policy Page

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/archives.

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page HERE. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2019   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service