Fire Engineering Training Community

Where firefighters come to talk training

What do you know about Liquid Graphite?

Views: 326

Reply to This

Replies to This Discussion

Using Google I was able to find the following on a MSDS Sheet for Graphite:

Section 5: Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: CLOSED CUP: Higher than 93.3°C (200°F).
Flammable Limits: Not available.
Products of Combustion: Not available.
Fire Hazards in Presence of Various Substances: Slightly flammable to flammable in presence of open flames and sparks,
of heat, of oxidizing materials.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
Slightly explosive in presence of moisture.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on Fire Hazards:
It will ignite on contact with chlorine trifluoride and fluorine.
Graphite dust may ignite on contact with air.
May re-ignite after fire is extinguished.
Special Remarks on Explosion Hazards: Material in powder form, capable of creating an explosion on contact with water.
It is also an Isopronal (SP) which is highly flamamble and a class 3.
I know that graphite in methanol is used for piano maintenance, to blacken specific small piano parts of which the black has worn. It is sold in small 40 cc bottles. Its brand name is Winslip Liquid Graphite.

See the following links:
http://www.ptg.org/pipermail/pianotech/2005-March/169850.html

http://www.fletcher-newman.co.uk/catalogue/piano_lubricants/index.html

You might
What makes up that chemical though?
Hi Todd,

I have just sent an email to the producer of Winslip with the request to send me an MSDS. I will let you know as soon as they answer me.

Jetty
Hey Jetty
Look at Ted Pella to Liquid Graphite may be the Brand Name.

Todd

Reply to Discussion

RSS

Policy Page

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/archive/.

Fire Engineering Editor in Chief Bobby Halton
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our policy page. -- Bobby Halton

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

© 2021   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service