Fire Engineering Training Community

Where firefighters come to talk training

Need information on the concrete wall breech techniques. Want to teach it to the new hires but I want to make sure I follow the correct sequence in the procedure. Any direction I could get would be appreciated and beneficial. Fraternally, Lt. Mike Camelo

Views: 224

Reply to This

Replies to This Discussion

Thanks for the reply Tom. Actually was refering to CBS block walls.Concrete block,Cement block etc. Wasnt refering to solid concrete or poured tilt up as we are seeing more and more of here in Florida. I am teaching a class on CBS wall breeching,along the lines of Rapid Intervention.I already know the sequence of removing the block,but I was looking for some addtional information or insight from those that might have used it already on "jobs" or in teaching it to there troops on there departments. Thanks again for the tip on the saw though,I will be checking out the video link you sent as well. Be safe brother and thanks again..........Lt. MC.

Reply to Discussion


Policy Page


The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.


Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail

FE Podcasts

Check out the most recent episode and schedule of

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service