Fire Engineering Training Community

Where firefighters come to talk training

Need a generic apparatus spec for RFP, TDA preferred.

Our department is working on a spec for a new TDA. We are new at writing specs for bid (previously used sole-source purchasing). Does anyone have a generic spec they could send so that we can mimic the language? We don't want to copy a manufacturer's spec that could include excessive proprietary language.

Thanks for any help!

Views: 236

Reply to This

Replies to This Discussion

The difference between a sole source and a generic spec is mostly in the use of brand names and model numbers.

You can specify the engine and transmission brand since they are available to any apparatus builder.  Same goes for most controls, valves, etc. This would be done to "ensure compatibility with current equipment, reduce training variations, and reduce spares required, maintenance training," Thus we specify Allison transmissions on custom chassis. You can specify cabinet sizes or what has to fit inside.  If you are furnishing equipment, such as SCBA and spare bottles and want a particular rack installed you can specify that.  You can even specify wheels and tires Pumps are much more generic in design so all you usually specify is capacity, discharge/intake locations and sizes.

Look at your current spec and see if deleting brand names for features and or replacing them with functional specifications will work.  Our spec always includes a "hill climb" performance requirement because we have a notorious hill in town and the apparatus must climb it to spec to be accepted. 

Your solicitor can advise as to proper language for your jurisdiction. Or you can hire a reviewer. The less detailed the spec the easier it is for a builder to respond, the harder it is to evaluate, and you mioght be ambiguous on something you really want your way.

Irv Lichtenstein

ilichten1@verizon.net

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service