Fire Engineering Training Community

Where firefighters come to talk training

I have a question about the Cairns leather helmets.  It is my understanding that the n5a (New Yorker) is only osha compliant and the n6a (Sam Houston) is the nfpa compliant.  Now I have heard some differing opinions such as newer n5a's are compliant and many different things about both helmets.  All the New Yorkers I have looked up all seem to have bourkes only, and the Sam Houston's can have bourkes or the snow plow shield or googles or such combination.  I own an n5a New Yorker and my New Yorker came brand new from cairns with the snow plow shield.  It didn't come with bourkes, has no holes in the brim for bourkes, I did not drill holes to add the shield, it came brand new from the factory with no bourkes and a face shield.  I did add a pair of ESS goggles.  My question is, because the helmet came with NFPA approved eye protection, does this have any impact on making the helmet NFPA compliant?

Views: 7031

Reply to This

Replies to This Discussion

The N5A's can only be OSHA compliant due to the impact cap from my understanding.  The Houston has a different impact cap which will make it NFPA only with the faceshield or goggles "ATTACHED FROM THE FACTORY".  I have been through this issue of "NFPA" helmets with two different departments.  Also know this, if you have a helmet that is OSHA compliant from the factory you cannot add a set of goggles to it to make it "NFPA".  The manufacturer has to install the eye protection to make it the high and mighty NFPA version.  I hope this helps.

Larry is correct

Thanks everyone, this has been a big help

-Just remember, the goggles were never designed or intended to be worn on the helmet at all times. That's the reason for the "quick connection" on the helmet mounting post.

-They can and do melt and burn. They also collect debris that can get in your eyes.

-Goggles are supposed to be carried in your pocket. 

-Personally I'm not a fan of the goggles. My leather NY'er is equipped with Bourkes.

Michael--Tell that to my Chiefs and Officers.  I need to find that in writing to show them.  Although I work for a great Capt. who wears a NY'er also and doesn't care that my Houston is only OSHA.

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service