Tags:
I would recommend taking a look at CMO COMPLIANCE software, I know they do various integrations and operate on ipad, pda's and laptops offline. You will be able to manage the complete fire safety inspection using there software.
Hi Mike,
We provide Inspection software and also the hand held units if required.
Please let me know if you would like me to arrange a short demonstration of the system in the next few weeks, which should take no longer than 30 minutes and can be carried out online. I have attached a link to the new brochure (PDF Link) below, but very briefly, the system;
Here is a link to the master brochure which might also be useful.
http://www.motionsoftware.co.uk/documents/motion_inspect.pdf
Kind Regards
Fiona Philip
+44 (0) 1224 820099
The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.
Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.
For vetted content, please go to www.fireengineering.com/issues.
We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.
Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.
Check out the most recent episode and schedule of UPCOMING PODCASTS
180 members
74 members
330 members
614 members
13 members
123 members
16 members
411 members
83 members
6 members
© 2023 Created by fireeng.
Powered by
Home | Product Center | Training | Zones | EMS | Firefighting | Apparatus | Health/Safety | Leadership | Prevention | Rescue | Community | Mobile |