Roll up doors

Replies to This Discussion

Permalink Reply by Ken Crowley on January 9, 2011 at 3:54pm

Hi Tom....

 

Best not to use any oils as the dirt and grit stick to them and causes them stick. We give the rails a rub down with a damp cloth to clean off as much dirt as possible and apply a silicon spray ( we also use this for lubricating moving parts and rollers on our ladders as the dirt doesn't stick like it does to oils ). How often we do this depends of course depends on how regularly we are out. As a minimum we give them a clean once a month as the silicon spray dries out......

 

Ken

• ▶ Reply

Permalink Reply by J noway on January 11, 2011 at 11:41pm

Silicon spray, is what ROM told us. This was straight from the factory that is about 10 miles from us.

• ▶ Reply

Permalink Reply by Ken Crowley on January 14, 2011 at 6:23pm

...excuse my ignorance but who or what is ROM ?

Jeremy Watters said:

Silicon spray, is what ROM told us. This was straight from the factory that is about 10 miles from us.

• ▶ Reply

▶ Reply to Discussion