Fire Engineering Training Community

Where firefighters come to talk training

A co-worker showed me a homemade door hinge tool that he used to keep a door open. It was made out of a piece of angle iron and a hook that you simply would hang over the hinge. I liked the tool, but it seemed a little too bulky to stuff in a pocket, so I tried to make one similar but not as bulky. I attached some pictures.

Pete

Views: 466

Attachments:

Reply to This

Replies to This Discussion

Don't waste your time with the door hinge tool, stick with the plain old, multi use, highly versatile old fashion wooden door chock. They work the best and are easy to make and/or obtain.
How much silverdine do you think you will need, after standing up at a good fire, to use that? Stick with the old fashion wood door chock
bobby g
Don't get me wrong, I'm not knocking the wooden door wedge. I keep one in my turnouts as well, but I've seen many wooden wedges get dislodged by somebody walking or crawling or dragging a hose through the door. Next thing you know, the door closes behind you and you just lost another door wedge. If I'm crawling in, I just slip the "door hinge tool" over the bottom hinge. It keeps the door wide open and I don't have to worry about it becoming dislodged. It's just another option. I handed some out at work and I got some good feedback from my co-workers, so I thought I would just put it out there for other departments to see and possibly try.
Remember, we should only be chocking doors if a line goes through the door opening. If we don't have a line we should close the door conduct the search and vent. If when we return to the door the line is in place we can chock the door to aid in ventalation.
Sorry Frank I disagree. I was taught if you go in then chock the door. If something happens you can get right out. It never failed me, not once. The last thing you need to be doing is looking for the door knob while Mr. Fire is chasing your a** out of the room you were just searching. Take it a step further, if your going in the window, make it a door, take everything out, glass, frame, everything.

Remember, we should only be chocking doors if a line goes through the door opening. If we don't have a line we should close the door conduct the search and vent. If when we return to the door the line is in place we can chock the door to aid in ventalation.
I have to agree with Robert. We have doors that can lock once we go through. Chock the door to prevent being locked in or out. Wooden wedges work great but sometimes you have to go through a lot of doors and if you can carry a few more chocks without bulk go for it.

Reply to Discussion

RSS

Policy Page

PLEASE NOTE

The login above DOES NOT provide access to Fire Engineering magazine archives. Please go here for our archives.

CONTRIBUTORS NOTE

Our contributors' posts are not vetted by the Fire Engineering technical board, and reflect the views and opinions of the individual authors. Anyone is welcome to participate.

For vetted content, please go to www.fireengineering.com/issues.

We are excited to have you participate in our discussions and interactive forums. Before you begin posting, please take a moment to read our community policy page.  

Be Alert for Spam
We actively monitor the community for spam, however some does slip through. Please use common sense and caution when clicking links. If you suspect you've been hit by spam, e-mail peter.prochilo@clarionevents.com.

FE Podcasts


Check out the most recent episode and schedule of
UPCOMING PODCASTS

Groups

© 2024   Created by fireeng.   Powered by

Badges  |  Report an Issue  |  Terms of Service